drylin® SLW series lead screw linear module

Especially multifaceted and torsionally rigid with a double-shaft profile

Very torsionally stable aluminium dual shaft rails and many carriage versions characterise the drylin SLW linear module product range. The linear modules with their high flexural strength are not only ideal for manual format adjustments, but can also be fitted with a motor to make electrical adjustments.

High torsional stability
Fully supported
Hard-anodised rails
Special version SLW-AL with shaft ends made of hard anodised aluminium available on request
Stainless steel version with corrosion-resistant steel components (1.4305 or 1.4571); for stainless-steel version, choice of bearing material iglidur® J, iglidur® X or iglidur® A180.

The SLW series installation sizes

SLW-0630

Carriage length: 60mm
Load capacity:
- axial: 50 N
- radial: 200 N
Max. stroke length: 300mm
Shaft diameter: 6mm
Shaft end support material: polymer

SLW-BB-1030

Carriage length: 48mm
Load capacity:
- Axial: 250N
- Radial: 1,000N
Max. stroke length: 400mm
Shaft diameter: 10mm
Shaft end support material: aluminium

SLW-1040 linear module with lead screw drive

SLW-1040/SLW-1080

Carriage length: 69mm/100mm
Load capacity:
- Axial: 700N
- Radial: 2,800N
Max. stroke length: 750mm
Shaft diameter: 10mm
Shaft end support material: zinc die-casting/aluminium

SLW-10120

Carriage length: 100mm
Load capacity:
- Axial: 700N
- Radial: 2,800N
Max. stroke length: 750mm
Shaft diameter: 10mm
Shaft end support material: aluminium

SLW-1660

Carriage length: 100mm
Load capacity:
- Axial: 1,200N
- Radial: 4,600N
Max. stroke length: 750mm
Shaft diameter: 16mm
Shaft end support material: aluminium

SLW-16120

Carriage length: 100mm
Load capacity:
- Axial: 1,200N
- Radial: 4,600N
Max. stroke length: 750mm
Shaft diameter: 35mm
Shaft end support material: aluminium
Optionally with ball bearing lead screw (BB)

SLW-2080

Carriage length: 150mm
Load capacity:
- Axial: 1,600N
- Radial: 6,400N
Max. stroke length: 1,000mm
Shaft diameter: 20mm
Shaft end support material: aluminium

SLW-25120

Carriage length: 150mm
Load capacity:
- Axial: 2,500N
- Radial: 10,000N
Max. stroke length: 1,250mm
Shaft diameter: 25mm
Shaft end support material: aluminium

All information and data about the SLW product range

Technical options for the SLW series

The following options can be configured directly online for the SLW product range.

Lead screw materials

All drylin® linear modules can be delivered with self-locking steel and stainless steel trapezoidal lead screws; upon request, they can also be made from hard coated aluminium. The SHT and SLW series can also be configured with stainless steel high helix lead screws. This allows much higher pitches and drive speeds, but without the self-locking feature.

More about igus® lead screws

Plain bearing material for igus linear modules and XY tables

Bearing materials

All drylin® drive units bearing points are equipped with lubrication-free and maintenance-free igus® high performance polymers. Options include materials for high-temperature applications up to +180°C (iglidur® X, SHT-ES series), and for FDA-compliant environments (iglidur® A180).

Thành phần trượt cho ổ trượt trơn drylin

Electric drive systems: electric motors from igus

Whether DC, lead screw stepper or EC/BLDC motors: with its wide-ranging motor shop, igus offers the possibility of equipping linear axis systems with the appropriate motor solutions. In combination with drylin linear axes, which can be ordered completely ready for installation and connection, entire handling systems can be configured. With the powerful motors you solve a wide variety of problems in electric drive technology.

To the stepper motors

Lead screw clamp

In many applications, a clamping option is also required as an additional safeguard against unintentional adjustment.

Shaft clamping flange for clamping the lead screw to the position indicator
Secures the lead screw against inadvertent turning
Material: polymer housing with aluminium shaft clamp
Colour: black

drylin® lead screw clamping

Digital position indicator

The electronic position indicator (battery operated) for drylin® linear modules can be freely programmed for the individual thread pitch in each case. Ideal for use with dryspin® high helix threads. LCD display with 5 digits and special characters, long battery life and easy battery change without removal of the device.

drylin hand wheels

An extensive selection of hand wheels for a wide variety of requirements is available to ship from stock. They range from small, compact sizes up to Ø125 with or without handles and in various configurations.

drylin® hand wheels

SLW - Compact

L max.:

SLWM-1080 – linear module with measurement system

SLW Installation Size 1080 can also be delivered with a digital measuring system. The stroke and measuring length can be determined individually, the moving display can be set to metric or imperial, and the zero point can be set to any position. The count direction can also be set manually, and the fixable ball head allows an ergonomic reading direction.

Space-saving sensor integrated in the carriage
Operation without mains supply
Integrated magnetic tape

To the SLWM-1080 linear module with measuring system

Lead screw linear module with measuring system

Configure an individual SLW linear module online

Find and order the right linear module in just a few clicks
Enter details and choose the appropriate proposal
Select optional accessories
Add to shopping cart and submit order or request a quotation online
Download parts list as PDF file

Configure and order a linear module

Other SLW linear module versions

SLWT linear module with double lead screw

SLW with double lead screw

Carriages can be controlled separately
Separate manual adjustment of carriages
Design flexibility

SLWT with two linear systems

Cost-effective drylin econ linear module

SLW econ

Light and cost-effective
Silver anodised rail profile
High helix thread or trapezoidal thread

To the SLW econ series

SLW-ES stainless steel linear module

Selectable plain bearing material
FDA-compliant with iglidur A180 plain bearing
High temperature iglidur X bearing, works in up to +250°C

SLW-ES stainless steel linear modules

drylin® linear modules with a single click ...

... order linear modules harnessed, ready to connect, with stroke lengths of 250 and 500mm in the online shop.

With lead screw drive or toothed belt drive
Two defined stroke lengths for each system
Flexible with drive pins for manual and electric operation. Ready to install with lead screw clamp, position indicator and hand wheel for quickly replicable adjustments
No time-consuming searching and assembly
Reduced design effort with PDF and CAD file available in the online shop

To the linear module shop

To the SLW linear module overview

Xuất hàng trong vòng 10 - 14 ngày làm việc

Thời gian giao hàng khi yêu cầu

Cookies là quan trọng để cho một trang web vận hành đúng cách thức. Nhằm cung cấp cho bạn một trải nghiệm trang web thú vị, chúng tôi sử dụng cookies để lưu trữ thông tin của bạn. Điều này cho phép chúng tôi cung cấp cho bạn quá trình đăng nhập an toàn, thu thập thông tin thống kê để có tính năng trang web nâng cao và cung cấp cho bạn nội dung thích hợp với nhu cầu của bạn. Hãy nhấp chuột vào „Chính sách Quyền riêng tư“ để có mô tả chi tiết các loại cookies mà chúng tôi sử dụng và để có thông tin về các tùy chọn rút ra.

Khi sử dụng trang web này, bạn đồng ý với việc chúng tôi sử dụng cookies. Chính sách quyền riêng tư dữ liệu.. Tôi đồng ý.

Quốc gia/Khu vực

Khi chọn quốc gia của mình, bạn sẽ nhận được các thông tin và ưu đãi khi mua hàng tại địa phương.

Vui lòng chọn địa điểm giao hàng của bạn