Product information
- Payload
up to 2.5kg
- Workspace
500 x 150mm
- Degrees of freedom:
2
- Speed:
up to 0.5m/s
- Repeatability
± 0.5mm
Optionally available
Product information
Optionally available
Line robot
For a wide range of tasks, igus offers linear robots as surface, line and room linear robots. igus linear robots contain pre-configured drylin linear modules and linear axes with igus stepper motors and all components necessary for self-assembly.
Application examples
Typical applications of our drylin® line robot are pick & place, conveyor belt picking and stacking tasks. They usually provide the platform on which our customers build their application. For example, a gripper can be mounted very easily to enable sorting tasks.
Y-axis
consisting of: drylin® ZLW-0660 toothed belt axis, standard version, toothed belt tension 150N, feed 54mm/rev, aluminium profile, surface: hard-anodised, PU toothed belt with steel cord, white, guide carriage in length 100mm, shaft end support made of aluminium, driven by an igus stepper motor with the installation size NEMA23 in the version with M12 connectors and encoder
Z-axis
Consisting of: drylin® GRW-0630 cantilever axis, lead 44mm/rev, aluminium profile, surface: hard-anodised, aluminium shaft end support, driven by an igus stepper motor in installation size NEMA17 in the version with M12 connectors and encoder.
Control system
The igus Robot Control software enables simple and intuitive robot control and programming, making it easy to get started with automation. The modular design allows different igus kinematics, such as delta robots, to be controlled. The linear robot can be controlled directly by our igus® Robot Control with all its advantages.
The free and licence-free igus Robot Control software is integrated into the control system and therefore uses a uniform operating concept and consistent communication services for many components of a system. This means less project planning and faster commissioning.
The igus Robot Control is not part of the product and can be purchased from us as an option. A master control system is not necessary.
If you want to use your own (robot) control system, that is also no problem.
Alternatively, it is also possible to operate each axis individually with a control system. For example, with our igus® D1 dryve motor control system. With this control system architecture, you need one motor control system and an additional master control system per linear axis and motor, which controls the coordination of the movement. You then have to program the inverse kinematics for the delta robot yourself in your development environment.
The motor control systems are not part of the product and can be purchased from us as an option. A master control system is currently not offered by igus.
Optional accessories
Cable set for 2-axis kinematics in 3, 5 or 10 m, igus® Robot Control for linear robots or Further sizes available upon request.
More information
The maximum payload is up to 2.5kg. The motor of the Z-axis is heavily loaded and wear increases. If you are unsure whether you can use the product as desired, please contact us. For a technical design, we can offer you different sizes with strokes of up to 6m and a load capacity of 20kg. Please feel free to contact us or use our linear robot configurator (Beta).
More information: Category: linear robot - wiki

Thời gian làm việc:
Thứ Hai đến Thứ Sáu từ 8:30 đến 17:30
Online:
Thứ Hai đến Thứ Sáu từ 8:30 sáng đến 17:30