Liên hệ
igus® Vietnam Company Limited

Unit 4, 7th Floor, Standard Factory B, Tan Thuan Export Processing Zone, Tan Thuan Street

District 7, HCM City, Vietnam

+84 28 3636 4189

iglidur® R, sleeve bearing, mm

  • Low humidity absorption
  • High media resistance
  • Resistant to edge pressures
  • Resistant to impacts/shock
  • Resistant to dirt and dust
  • LowCost-material for large quantities
Mô tả sản phẩm
iglidur® R | Low-cost material, low wear
The development of iglidur® R as a bearing material focused on high performance and very low cost. Especially in the dry operation, a low coefficient of friction and wear were to be achieved. Plain bearings made from iglidur® R are supported by a combination of solid lubricants. The PTFE and silicone-free material achieves extremely low coefficient of friction in dry operation and runs largely free of stick-slip effects. 

Typical application areas
 
Model building
Furniture/Industrial design
Fitness and sports
 
Further applications can be found here:
Industry solutions
 
When to use it?
  • When high wear resistance at low loads is required
  • If you are looking for a very cost-effective bearing
  • When a very low coefficient of friction in dry operation is required
  • If edge loads occur
  • When you are looking for low water absorption
  • When PTFE and silicone are not allowed in your application
When not to use it?
Use our filter options to find the suitable product
 
Tolerances and measuring system
The installation height and tolerances of iglidur® plain bearings are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule of thumb for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
 
Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting into the correctly toleranced housing hole. The press-fit interference can be up to 2% of the inner diameter. This ensures that the bearing is securely press-fitted. Axial or radial movement in the housing are also prevented in this way.
iglidur® - assembling, gluing, machining
 
Giấy chứng nhận và tiêu chuẩn
RoHS compliant
According to 2011/65/EU (RoHS 2)
Dữ liệu kỹ thuật
Phụ kiện
Tải xuống

Tư vấn

Photo
Aw Kai Hua

Product Manager iglidur® bearings ASEAN

Viết e-mail

Vận chuyển và tư vấn

Người liên hệ:

Thứ Hai đến Thứ Sáu từ 8:30 sáng đến 17:30

Online:

24h

CÔNG TY TNHH IGUS VIỆT NAM
Đơn vị 4, tầng 7, Xưởng tiêu chuẩn B, đường Tân Thuận, Khu Chế Xuất Tân Thuận, phường Tân Thuận Đông, Quận 7, Thành phố Hồ Chí Minh, Việt Nam
IGUS VIETNAM COMPANY LIMITED
Unit 4, 7th Floor, Standard Factory B, Tan Thuan road, Tan Thuan EPZ, Tan Thuan Dong ward, distrct 7, HCMC, Vietnam
Số điện thoại: +84 28 3636 4189
Giấy chứng nhận đăng ký doanh nghiệp số: 0314214531
Ngày đăng ký lần đầu/ Date of issuance: January 20, 2017
Nơi cấp/ Place of issuance: SỞ KẾ HOẠCH VÀ ÐẦU TƯ THÀNH PHỐ HỒ CHÍ MINH/ DEPARTMENT OF PLANNING AND INVESTMENT OF HO CHI MINH CITY