Bạc lót nhựa trơn iglidur® W300, mm - W300SM

iglidur® W300 | The classic endurance runner, wear-resistant on (almost) all shafts
iglidur® W300 offers high wear resistance, even in rough shafts or very abrasive ambient media. From the iglidur® range, this material is the most tolerant regarding these external effects.

Typical application areas

Vending machinery
Printing industry
Woodworking
Mechanical engineering

You can find further application areas here:
Industry solutions
 

When to use it? When especially long service life is necessary When low coefficient of dynamic friction and high wear resistance are required For use on 304 stainless steel shafts For harsh environments and rough shafts Dirt-resistant

When not to use it? For high loads from 50MPa iglidur® Q, sleeve bearing, mm If temperatures are permanently higher than +90°C iglidur® H, sleeve bearing, mm iglidur® X, sleeve bearing, mm For very humid ambient conditions iglidur® P, sleeve bearing, mm If a particularly economical bearing is required iglidur® G, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining