Double joint, EGZM, R, igubal®

Dimensional series: E following DIN ISO 12240
Housing material: igumid G
Material of spherical ball: iglidur® R
Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant
Double joint turned 90° available upon request

Không chắc có vừa hay không?

Mô tả sản phẩm

igubal® spherical bearings

The use of spherical bearings is usually associated with high weight bearing materials, difficult installation, and high costs. Most of the time, maintenance is still necessary over the long-term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.

Here, the spherical ball is manufactured from iglidur® R, which is a low-cost material with low coefficients of friction and good wear resistance at low to medium loads.

Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant

Typical application areas

Food industry
Railway technology
Automotive industry
Plant construction

You will find plenty of additional application areas at our Industry solutions

When to use it?

For high axial and radial loads
When easy installation is required
In case of cramped installation space
If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments

When not to use it?

If temperatures are higher than +80 °C
If diameters above 12 mm are required
If rotation speeds higher than 0.5 m/s are required

Use our filter options to find the suitable product

Tolerances
Maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Check the inner diameter

Assembly
igubal® spherical bearings are press-fitted into a recommended H7 housing bore and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

Dữ liệu kỹ thuật

Các công cụ trực tuyến

Công cụ tìm kiếm sản phẩm dành cho ổ đỡ

Nhanh chóng tìm thấy ổ đỡ phù hợp. Công cụ tìm kiếm sản phẩm iglidur® chỉ cho bạn giải pháp ổ đỡ thích hợp cho ứng dụng của bạn chỉ với vài cú nhấp.

Chuyên gia dành cho ổ đỡ

Chỉ nhập vài mẫu thông tin để tính toán thời hạn vận hành dự kiến của ổ đỡ igubal®.

Tải xuống

Các giải pháp khác

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

từ 208.206 VND/Pc.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

từ 92.754 VND/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

từ 213.891 VND/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® R

Simple assembly, two mounting holes, dimensional series E

từ 152.863 VND/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® R

For higher radial loads, four mounting holes, dimensional series E

từ 176.981 VND/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T R, igubal®

Tolerance compensation, dimensional series E

từ 180.743 VND/Pc.

Pillow block bearing, ESTM, R, igubal®

Simple assembly, two mounting holes, dimensional series E

từ 117.834 VND/Pc.

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

từ 747.677 VND/Pc.

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

từ 81.844 VND/Pc.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

từ 509.626 VND/Pc.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

từ 58.478 VND/Pc.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

từ 66.713 VND/Pc.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

từ 929.841 VND/Pc.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

từ 81.385 VND/Pc.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

từ 59.607 VND/Pc.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

từ 148.390 VND/Pc.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

từ 176.521 VND/Pc.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

từ 94.175 VND/Pc.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

từ 64.832 VND/Pc.

Adapter screw, PKRM, igubal®

Right-hand thread

từ 235.668 VND/Pc.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

từ 99.860 VND/Pc.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

từ 103.622 VND/Pc.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

từ 263.089 VND/Pc.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

từ 161.850 VND/Pc.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

từ 133.927 VND/Pc.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

từ 253.642 VND/Pc.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

Theo yêu cầu

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

từ 987.567 VND/Pc.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

từ 358.686 VND/Pc.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

từ 393.714 VND/Pc.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

từ 166.113 VND/Pc.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

từ 114.030 VND/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

từ 226.180 VND/Pc.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

từ 113.111 VND/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

từ 201.100 VND/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

từ 387.068 VND/Pc.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

Theo yêu cầu

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

từ 176.521 VND/Pc.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

từ 275.671 VND/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

từ 461.096 VND/Pc.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

từ 675.948 VND/Pc.

Clevis joint, GERI, igubal®

Right-hand thread

từ 88.491 VND/Pc.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

từ 97.018 VND/Pc.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

từ 99.902 VND/Pc.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

từ 3.075.811 VND/Pc.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

từ 125.400 VND/Pc.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

từ 21.276 VND/Pc.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

từ 163.271 VND/Pc.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

từ 1.362.680 VND/m

Quốc gia/Khu vực

Khi chọn quốc gia của mình, bạn sẽ nhận được các thông tin và ưu đãi khi mua hàng tại địa phương.

Vui lòng chọn địa điểm giao hàng của bạn